帶式油水分離機（刮油機、撇油機、浮油收集機）廣泛應用于清洗機、數控機床、CNC加工中心等機床中的水劑、乳化液中漂浮的油污自動分離出來，從而延長了冷卻液的壽命，同時也延長了刀具的使用壽命，保證了加工精度

工作原理：

利用油水之間不同重力和表面張力等特性，當刮油帶穿過水面時，吸附并帶走表面各種浮油

特點：

1.特制親油疏水不銹鋼帶，吸油性強

2.不銹鋼機殼，適合清洗機水槽適用

3.使用PP材質驅動輪，消除了鐵屑吸附不易清理的問題

3.采用中空軸電機，使電機與箱體分離，避免蒸汽進入電機（特別適合于清洗機）

4.可根據客戶提供水池深度定制鋼帶

規格：

1.電壓：220V/380V/三相220V

2.功率：25W

3.刮油量：0-40L/H

4.鋼帶寬:100mm

5.重量：10KG

TB-100A  OIL  SKIMMER

Belt type oil-water separator is widely used in CNC machine tools, CNC machining centers and other machine tools in the water, oil floating in emulsion automatic separation, thus extending the life of the coolant, but also extend the service life of the tool, to ensure the processing accuracy

Working principle:

Using the characteristics of different gravity and surface tension between oil and water, when the wiper belt passes through the water, it absorbs and takes away all kinds of floating oil on the surface

Features:

1. Special oil-wet and water-repellent stainless steel belt with strong oil absorption

2. Stainless steel case, suitable for washing machine sink

3. PP drive wheel eliminates the problem of iron scrap adsorption drive wheel is not easy to clean

4. Hollow shaft motor is used to separate the motor from the box body to avoid steam entering the motor

5. The steel belt can be customized according to the depth of the pool provided by customers

Specifications:

1. Voltage: 220V/380V/ three-phase 220V

2. Power: 25W

3. Oil scraping amount: 0-40L/H

4. Steel bandwidth :100mm

5. Weight: 10KG